고성능 2채널 디지털-아날로그 변환기
The CS4302P is a 2-channel, 32-bit resolution audio DAC supporting sample rates of up to 768 kHz. The CS4302P’s proprietary filtering adapts to preserve clarity and tonal accuracy across sample rates of 44.1 kHz to 768 kHz, creating a consistent sound that stays balanced independent to the content users are playing. Compared to alternative solutions that rely on specialized low-noise supplies, the CS4302P achieves 128 dB dynamic range without added BOM cost and complexity.
Cirrus Logic의 고성능 오디오 솔루션에 대해 자세히 알아보십시오.
CIRRUS ROCKS® CIRRUS® ENGINEERED TO ROCK® INNOVATION THAT ROCKS®
기술
기능
- 고성능 스테레오 DAC
- 차동 아날로그 출력
- 고해상도 32비트 디지털 아키텍처
- 낮은 지연 디지털 필터 및 디지털 음량 조절
- PLL은 다양한 외부 시스템 클록 참조 지원
- 여러 장치에서 동기식 작동
- 최대 768kHz의 ASP(오디오 직렬 포트) 샘플레이트
- I2S, 왼쪽 정렬 및 TDM 데이터 형식
- 최대 512xfs DSD
- 하드웨어 및 소프트웨어 제어 모드
- 호스트 프로세서가 필요 없는 하드웨어 제어
- I2C 제어 포트 최대 1MHz
- SPI 제어 포트 최대 24MHz
- 단일 전원 공급 작동 3.3V
- 1.8V–3.3V 디지털 입력/출력 지원
파라메트릭 사양
| 채널 출력 | 2 |
| 해상도(bits) | 32 |
| 동적 범위(dB) | 129 |
| THD+N(dB) | -115 |
| 샘플레이트(KHz) | 768 |
| 아날로그 전원 공급 장치(V) | 3.3 |
| 디지털 전원 공급 장치(V) | 3.3 |
| 로직 전원 공급 장치(V) | 1.8-3.3 |
| 출력 레벨(Vrms) | 2 |
| 패키지 | 48핀 QFN |
기술 문서
CDB-PROAUDIO User Guide
May 1, 2026, DS1352R4 : 4.0 MBCS4302P Product Data Sheet
Aug 1, 2025, DS1315F1 : 4.2 MbCS430xx Output Buffer/Filter Circuits
Aug 1, 2025, AN0679R1 : 297.7 KBDC4302P Schematic and Layout
Aug 1, 2025 : 5.5 MbCDB-DC4302P-DAC User Guide
Jul 1, 2025, DS1394DB4 : 4.0 MbCS4302P Product Bulletin
Jun 25, 2024 : 16.4 Mb언론 보도
2024
6월 25일
Cirrus Logic, 전문 오디오 변환기 제품군에서 최신 추가 기능 공개
뮤지션, 라이브 엔터테이너, 녹음 엔지니어에게 맞춤화된 최고의 하이파이 오디오를 위해 공학적으로 설계된 디지털-아날로그 변환기 및 코덱 제품 출시
선택 지침
CS4302P은(는) 다음과 같은 경우에 선택해야 합니다.
- Synchronizing multiple audio output channels is required.
- 오디오 제품을 설계하는 데 사용할 수 있는 엔지니어링 리소스가 제한적입니다.
- Low latency (4.5/fs) is required across multiple channels.
- You would like to achieve multiple distinct audio signatures from a single DAC, utilizing selectable digital filters without hardware changes.
CS4302P은(는) 다음과 같은 경우에는 선택해서는 안 됩니다.
- An integrated headphone or lineout driver is required. In this case the CS43131 should be considered.
- An SPI interface is required for the input audio data.
- A single op-amp stage is required for cost/size reasons. In this case the CS4332S should be considered.
- 소형 폼팩터(TWS 헤드셋, 휴대폰)의 배터리 전원 제품을 설계하는 경우입니다. 이 경우 CS43131을(를) 고려해야 합니다.
- Greater than 130 dB of dynamic range is required.
The primary application for the CS4302P is HiFi. The CS4302P is placed directly after a FPGA/DSP or MCU converting digital audio, via the audio serial port (ASP), to analog audio. This analog audio feeds into conditioning circuitry to drive Line/Headphone and speaker outputs.
추가 관련 응용 분야는 다음과 같습니다. Digital mixers, USB audio interfaces, musical instruments, audio DACs, networked amplifiers, audio IO peripherals, effects processors, home audio receivers and home video receivers, effects processors, professional loudspeakers, high performance home speakers, portable MP3 players, wired and wireless headsets.
